AC 80-260V/100A Volt Amp Meter AC Multi function Voltage Ampere Power Energy Tester with Current Transformer

AC 80-260V/100A Volt Amp Meter AC Multi function Voltage Ampere Power Energy Tester with Current Transformer

A. Function

• 1. voltage, current, power, energy
• 2. overload alarm function (over power alarm threshold, the backlight and power flicker tips).
• 3. The power alarm threshold preset function (can set up their own power alarm threshold).
• 4.The power button clear function.
• 5. Power-down data storage function.
• 6. Large-screen LCD screen full display function (display voltage, current, active power, power).
• 7. backlight.

B. display and key

• I. Display Interface

Displayed by the large-screen LCD screen at the same time voltage, current, power, power parameters, as shown in FIG.

• II. Display Format

1. Power: measurement range 0 ~ 22kW

        1kW display format within 0.0 ~ 999.9W;

        From 1kW display format 1000 ~ 9999W;

        10kW above the display format 10.0 ~ 22.0kW.

2. Power: measurement range 0 ~ 9999kWh

        10kWh within the display format 0 ~ 9999Wh;

        Above 10kWh display format 10 ~ 9999kWh;

3. Voltage: Test Range 80 ~ 260V

        Display Format 80 ~ 220V

4. Current: Test Range 0 ~ 100A

        Display Format 0.00 ~ 99.99A.

C. Button

1. The backlight control

• By short press the button to turn on or off the backlight, the backlight status automatic storage.

2. The power cleared

• Step 1: Press the power button 5 seconds until the digital display window flashes, then release the button;
• Step 2: If you press the button again, the consumption data is cleared and cleared quit flashing;
• Step 3: If you press the button again 5 seconds long until no flashing, the charge data is not cleared and exit cleared.

3. The power to set the alarm value

• Step 1: Press the button, when the LCD screen display "SET CLr" after the release button, set the value into the power status report;
• Step 2: Power area displays the current value of the power alarm and the lowest digit starts blinking, then you can press the button of the digital +1, when there is no key operation more than three seconds, automatically switches by short digital set as above;
• Step 3: After setting, press the button more than five seconds to automatically save and exit, the scope of active power threshold set for the 0.0 ~ 22.0kW.

 Notes

• 1. This module is suitable for indoor, not outdoor use.
• 2. applied load can not exceed the rated power.
• 3. The wiring order can not be wrong.
• 4. This meter can only measure the pure sin wave power. Modified sin wave power can burn the meter in several minutes

​

Specifications

• 1. Working voltage: 80 ~ 260VAC
• 2. Test voltage: 80 ~ 260VAC
• 2. Rated power: 100A / 22000W
• 3. Working Frequency: 45-65Hz
• 4. Measurement accuracy: 1.0

​Package Content:

​

• 1 x AC Voltmeter Ammeter
• 1 x CT ( Choose the one you need )

​

With Round Coil

With PZCT-02 Split Coil

Successful application cases