PZEM-004T Update Version AC Single Phase Multifunction Ampere Meter Watt Power Volt Amp Kwh TTL Modbus With Split CT For Arduino

Name: PZEM-004T Update Version AC Single Phase Multifunction Ampere Meter Watt Power Volt Amp Kwh TTL Modbus With Split CT For Arduino
Brand: Online Shopping in pakistan international products
SKU: 32907139707
Price: 8806.08 PKR
Availability: InStock

Rs.8,806.08

Shipping calculated at checkout.

QUESTIONS & ANSWERS

Ask a Question

Delivery to islamabad in how many days?

7 to 21 days
imported from china

Share this Product

PZEM-004T Update Version AC Single Phase Multifunction Ampere Meter Watt Power Volt Amp Kwh TTL Modbus With Split CT For Arduino

We provide the software to connect it with the PC. If you want to connect it with other terminal device such as PLC,SCM and so on, please prepare the fitable cable and write the program by yourself.

This document describes the specification of the PZEM-004T AC communication module, the module is mainly used for measuring AC voltage, current, active power, frequency, power factor and active energy, the module is without display function, the data is read through the TTL interface.

PZEM-004T-10A: Measuring Range 10A (Built-in Shunt)

PZEM-004T-100A: Measuring Range 100A (external transformer)

If you need the software, please download it via this link:

http://www.mediafire.com/file/lk5wukg2v5n5iry/004T_software%252Bdriver%252Buser_manual.zip/file

Very Important Notification:

For this product PZEM-004T, we have the update version to replace the old version. The old version has been sold out and no produce anymore. The update information as following:

1. the new version has the same size and TTL port as before

2. the software is new, we have English software as same as the PZEM-014,016, The communication protocol change to be Modbus–RTU, the display interface is changed. now it can test Voltage ,Current, Power, Power factor, Frequency and Energy 6 parameters.

3. the new version has higher precision, faster refresh speed and the more stability communication than the old version.

4. The new version increase a set for 0-10A

4. Now the product is still naked PCB, but in the future we will have the good outside case.

Now you can still use the old link to submit the order, if there is any question, welcome to contact the service to get more information.

IMG_20190418_142649_

IMG_20190417_173024_ IMG_20190418_142529_ 111 112

114

115_ 100A

center_

1. Working voltage: 80 ~ 260VAC

2. Test voltage: 80 ~ 260VAC

3. Rated power: 100A/22000W

4. Operating frequency: 45-65Hz

5. Measurement accuracy: 1.0 grade

Function

Voltage

1.1.1 Measuring range:80～260V

1.1.2 Resolution: 0.1V

1.1.3 Measurement accuracy: 0.5%

1.2 Current

1.2.1 Measuring range: 0～10A(PZEM-004T-10A); 0～100A(PZEM-004T-100A)

1.2.2 Starting measure current: 0.01A(PZEM-004T-10A); 0.02A(PZEM-004T-100A)

1.2.3 Resolution: 0.001A

1.2.4 Measurement accuracy: 0.5%

1.3 Active power

1.3.1 Measuring range: 0～2.3kW(PZEM-004T-10A); 0～23kW(PZEM-004T-100A)

1.3.2 Starting measure power: 0.4W

1.3.3 Resolution: 0.1W

1.3.4 Display format:

＜1000W, it display one decimal, such as: 999.9W

≥1000W, it display only integer, such as: 1000W

1.3.5 Measurement accuracy: 0.5%

1.4 Power factor

1.4.1 Measuring range: 0.00～1.00

1.4.2 Resolution: 0.01

1.4.3 Measurement accuracy: 1%

1.5 Frequency

1.5.1 Measuring range: 45Hz～65Hz

1.5.2 Resolution: 0.1Hz

1.5.3 Measurement accuracy: 0.5%

1.6 Active energy

1.6.1 Measuring range: 0～9999.99kWh

1.6.2 Resolution: 1Wh

1.6.3 Measurement accuracy: 0.5%

1.6.4 Display format:

＜10kWh, the display unit is Wh(1kWh=1000Wh), such as: 9999Wh

≥10kWh, the display unit is kWh, such as: 9999.99kWh

1.6.5 Reset energy: use software to reset.

1.7 Over power alarm

Active power threshold can be set, when the measured active power exceeds the threshold, it can alarm

1.8 Communication interface

RS485 interface

1 Communication protocol

1.1 Physical layer protocol

Physical layer use UART to RS485 communication interface

Baud rate is 9600, 8 data bits, 1 stop bit, no parity

1.2 Application layer protocol

The application layer use the Modbus-RTU protocol to communicate. At present, it only supports function codes such as 0x03 (Read Holding Register), 0x04 (Read Input Register), 0x06 (Write Single Register), 0x41 (Calibration), 0x42 (Reset energy).etc.

0x41 function code is only for internal use (address can be only 0xF8), used for factory calibration and return to factory maintenance occasions, after the function code to increase 16-bit password, the default password is 0x3721

The address range of the slave is 0x01 ~ 0xF7. The address 0x00 is used as the broadcast address, the slave does not need to reply the master. The address 0xF8 is used as the general address, this address can be only used in single-slave environment and can be used for calibration etc.operation.

1.3 Read the measurement result

The command format of the master reads the measurement result is(total of 8 bytes):

Slave Address + 0x04 + Register Address High Byte + Register Address Low Byte + Number of Registers High Byte + Number of Registers Low Byte + CRC Check High Byte + CRC Check Low Byte.

The command format of the reply from the slave is divided into two kinds:

Correct Reply: Slave Address + 0x04 + Number of Bytes + Register 1 Data High Byte + Register 1 Data Low Byte + ... + CRC Check High Byte + CRC Check Low Byte

Error Reply: Slave address + 0x84 + Abnormal code + CRC check high byte + CRC check low byte

Abnormal code analyzed as following (the same below)

l 0x01,Illegal function

l 0x02,Illegal address

l 0x03,Illegal data

l 0x04,Slave error

The register of the measurement results is arranged as the following table

Register address	Description	Resolution
0x0000	Voltage value	1LSB correspond to 0.1V
0x0001	Current value low 16 bits	1LSB correspond to 0.001A
0x0002	Current value high 16 bits	1LSB correspond to 0.001A
0x0003	Power value low 16 bits	1LSB correspond to 0.1W
0x0004	Power value high 16 bits	1LSB correspond to 0.1W
0x0005	Energy value low 16 bits	1LSB correspond to 1Wh
0x0006	Energy value high 16 bits	1LSB correspond to 1Wh
0x0007	Frequency value	1LSB correspond to 0.1Hz
0x0008	Power factor value	1LSB correspond to 0.01
0x0009	Alarm status	0xFFFF is alarm，0x0000is not alarm

For example, the master sends the following command (CRC check code is replaced by 0xHH and 0xLL, the same below)

0x01 + 0x04 + 0x00 + 0x00 + 0x00 + 0x0A + 0xHH + 0xLL

Indicates that the master needs to read 10 registers with slave address 0x01 and the start address of the register is 0x0000

The correct reply from the slave is as following:

0x01 + 0x04 + 0x14 + 0x08 + 0x98 + 0x03 + 0xE8+0x00 + 0x00 +0x08 + 0x98+ 0x00 + 0x00 + 0x00 + 0x00 + 0x00 + 0x00 + 0x01 + 0xF4 + 0x00 + 0x64 + 0x00 + 0x00 + 0xHH + 0xLL

The above data shows

l Voltage is 0x0898, converted to decimal is 2200, display 220.0V

l Current is 0x000003E8, converted to decimal is 1000, display 1.000A

l Power is 0x00000898, converted to decimal is 2200, display 220.0W

l Energy is 0x00000000, converted to decimal is 0, display 0Wh

l Frequency is 0x01F4, converted to decimal is 500, display 50.0Hz

l Power factor is 0x0064, converted to decimal is 100, display 1.00

l Alarm status is 0x0000, indicates that the current power is lower than the alarm power threshold

1.4 Read and modify the slave parameters

At present,it only supports reading and modifying slave address and power alarm threshold

The register is arranged as the following table

Register address	Description	Resolution
0x0001	Power alarm threshold	1LSB correspond to 1W
0x0002	Modbus-RTU address	The range is 0x0001~0x00F7

The command format of the master to read the slave parameters and read the measurement results are same(descrybed in details in Section 2.3), only need to change the function code from 0x04 to 0x03.

The command format of the master to modify the slave parameters is (total of 8 bytes):

Slave Address + 0x06 + Register Address High Byte + Register Address Low Byte + Register Value High Byte + Register Value Low Byte + CRC Check High Byte + CRC Check Low Byte.

The command format of the reply from the slave is divided into two kinds:

Correct Response: Slave Address + 0x06 + Number of Bytes + Register Address Low Byte + Register Value High Byte + Register Value Low Byte + CRC Check High Byte + CRC Check Low Byte.

Error Reply: Slave address + 0x86 + Abnormal code + CRC check high byte + CRC check low byte.

For example, the master sets the slave's power alarm threshold:

0x01 + 0x06 + 0x00 + 0x01 + 0x08 + 0xFC + 0xHH + 0xLL

Indicates that the master needs to set the 0x0001 register (power alarm threshold) to 0x08FC (2300W).

Set up correctly, the slave return to the data which is sent from the master.

For example, the master sets the address of the slave

0x01 + 0x06 + 0x00 + 0x02 + 0x00 + 0x05 + 0xHH + 0xLL

Indicates that the master needs to set the 0x0002 register (Modbus-RTU address) to 0x0005

Set up correctly, the slave return to the data which is sent from the master.

1.5 Reset energy

The command format of the master to reset the slave's energy is (total 4 bytes):

Slave address + 0x42 + CRC check high byte + CRC check low byte.

Correct reply: slave address + 0x42 + CRC check high byte + CRC check low byte.

Error Reply: Slave address + 0xC2 + Abnormal code + CRC check high byte + CRC check low byte

1.6 Calibration

The command format of the master to calibrate the slave is (total 6 bytes):

0xF8 + 0x41 + 0x37 + 0x21 + CRC check high byte + CRC check low byte.

Correct reply: 0xF8 + 0x41 + 0x37 + 0x21 + CRC check high byte + CRC check low byte.

Error Reply: 0xF8 + 0xC1 + Abnormal code + CRC check high byte + CRC check low byte.

It should be noted that the calibration takes 3 to 4 seconds, after the master sends the command, if the calibration is successful, it will take 3 ~ 4 seconds to receive the response from the slave.

1.7 CRC check

CRC check use 16bits format, occupy two bytes, the generator polynomial is X16 + X15 + X2 +1, the polynomial value used for calculation is 0xA001.

The value of the CRC check is a frame data divide all results of checking all the bytes except the CRC check value.

center

100% new brand high quality

1 x PZEM-004T AC Voltmeter Ammeter

1 x Split CT

center1

center2

Payment

1. We accept payment that aliexpress can accept, We apologize that we cannot accept other payment methods, such as cheque or postal orders .

2. All major credit cards are accepted,and we received it in 24 hours.

3. Payment must be received within 5 business days of auction closing.

4. Before buying, Please make sure your address is correct. Or not, please correct it before payment

Shipping

1. The default shipping is by China Post Registered Air Mail.

2. Item will be shipped within 2-3 working days after full payment is received.

3. Buyers need to provide the correct address, we’ll not be responsible for item loss because of wrong or undeliverable address, and we do not accept the dispute

4. The extra fee occured when the product pass through the customs should be paid by buyer.

5. For considering environmental protection, we don't usually send paper specification, if you need it, please find it on the product description page or contact with us.

Warranty and Guarantee

1. All the products we are selling include factory warranty, don’t cover items that have been abused, burned and damaged in any form.

2. Please contact us if you have NOT received item in 30 days, we will check it with post office ASAP.

3. In the unlikely event that your product is faulty in anyway, you must contact us ASAP and then return it within 7 days of receipt. The postage and packaging fee will NOT be refunded.

4. If you don't satisfy with our product, please return it within 14 days for a replacement or money back. But the items must be back in Factory Condition. This includes packaging, inserts, manuals etc. Please contact us and double check the return address before you return it.

5. We will not be responsible for the delivery or insurance charges incurred in returning item back to us.

Contact us

Customer satisfaction is very important to us. If you have any questions, please do not hesitate to contact us anytime before and after your purchase, our Customer Service staffs welcome you to email .We strive to answer all questions and resolve any problems as quickly as possible.

We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.
Please allow 1-2 business days for us to response. If you do not receive any reply from us, please check your email ensuring your mailbox has not reached full size.

Related Products

[variant_title] - Round LED Dual Display AC Amp Volt Ampermeter Voltmeter Ammeter Digital Voltage Current Ampere Meter Indicator 60-500V 220V 100A

Round LED Dual Display AC Amp Volt Ampermeter Voltmeter Ammeter Digital Voltage Current Ampere Meter Indicator 60-500V 220V 100A

Regular price Rs.2,666.66

Intelligent Electronic Door Lock Smart Door Lock Fingerprint With bluetooth Card APP Key Unlocking 5 Ways +G2 Smart Gateway

From Rs.21,654.76

Itead Sonoff Pow R2, Wireless WiFi 16A Power switch Watt Meter Consumption Measurement, Smart Home Remote Watt meter IOT Device

Regular price Rs.10,299.84

AC 220V 22mm Digital Ammeter 0-100A Current Monitor Meter Signal Lamp Amperemeter

From Rs.1,843.84