20pcs/lot DM-RS1510MD metal gear digital 15kg low profile arduino robot rc servo
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Share this Product
Features:
-Low Profile digital servo with titanium gears 25T servo,2BB
-special design for 17DOF Humanoid robot,
-Operating Voltage: 6V~7.4V
-Dead band width: 2usc
-Interface: (JR)
-Wire length: 20cm
Specifications:
Item No.:DM-RS1510MD
Weight:42g
Size:44mmX23mmX26.5mm
Speed:0.25sec/60deg (6v) 0.23sec/60deg (7.4v)
Stall Torque:14.4kg.cm (6v) 16.5kg.cm (7.4v)
(Note:need UBEC if use 2S Lipo,for 2S Lipo max is 8.4v,it will burn the servo)
Operating Voltage:6-7.4Volts
Futaba,JR,SANWA,Hitec compatible.
Size (mm) |
Weight |
Wire |
6V |
7.4V |
Rotation angle |
|||||||
Speed |
Torque |
Speed |
Torque |
|||||||||
L |
W |
H |
g |
oz |
cm |
sec/60o |
kg-cm |
oz-in |
sec/60o |
kg-cm |
oz-in |
|
44 |
23 |
26.5 |
42.0 |
20.0 |
0.25 |
14.4 |
0.23 |
16.5 |
|
180degree(PWM500-2500us), |
Packing include :
20pcsXDM-RS1510MD servo
Important Notes:
1,the connector type is JR.
2,Refer to the figure when installing the servo accessories.connect the U frame together first,then instal it on servo,
3,For engine powered airplanes and boats, rubber must be used to reduce vibration.
4,Please choose correct model for your application.
5,Torque over-loaded will damage the servo's mechanism-.
6,Keep the servo clean and away from dust, corrosive gas and humid air.
7,please choose correct power voltage and make sure the current
The accessory:no U frame,no bearing