1.zigbee light work with zigbee zll gateway like Amazon ECHO Plus ,H*U*E,O*sr*am，IK*E*A
2.zigbee light work with H*ome K*-I-T ：https://www.reddit.com/r/Gledopto/comments/amp3v9/i_wrote_a_little_guide_on_getting_the_gledopto/
3.Sync your lights with movies ,music, and games,Enjoy the lighting effect which synchronizes with the plot of the picture immediately,and experience the more delicate atmosphere lighting effect.
How to sync? please follow this website： http://www.screenbloom.com/
Sync Show results： https://youtu.be/zZjtJMy_774
Q&A or more info, please go to: https://www.reddit.com/r/Gledopto/
Product Name:4W RGB+Dual White LED Candle light
Power : 4W
Voltage : 100-240V
Lifespan : 50000hrs
Max Diameter: 37.5mm
Color Temperature: RGB+CCT(2700-6500K)
Luminous Flux: 200LM
Luminous Efficiency: 80LM/W
1pcs* RGB+CCT Candle light (we have E14 and E12 for your choose)
1pcs* User Manual
In this manual we will explain the connection of wires and the connection with a ZigBee Light
These devices works with many ZigBee Light Link Gateways* like , Amazon Echo Plus.
1.Turn off the Power.
2.Plug in the bulb.
3.Now you can connect it with the gateway.
Connection with Gateway:
1.Connect the LED product to the controller see section “Installation”.
2.Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset.
3.The Gateway found your device and you can assign it to the different
4.Now you can use the device.
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after
blinking 4 times