Handheld Digital Amper Clamp Meter Current Meter Current Clamp Pincers Voltmeter Ammeter Multimeter Precision Measurement Tester
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Share this Product
Product technical features:
DC voltage: 200-600V±1.0%
AC voltage: 200-600V±1.2%
AC current: 2000m-20-600A±2.5%
Resistance: 200-200kΩ±1.0%
Product general characteristics:
Liquid crystal display size: 41x21mm
Liquid crystal display maximum value: 1999
Low voltage symbol display
Overload protection: have
Diode detection: there is, to show the approximate pressure drop
On-off detection and buzzer function: there
Data retention: there
Backlight display: there
Clamp caliber:∮44mm
Power supply: 1.5V AAA Battery*2(Not include Battery)
Product size: 195x56x25mm
Product weight: about 134g (without battery)
Standard configuration: bare table (without battery), leather, pen, battery, manual, certificate (warranty card)
Material: ABS
Introductions:
The multimeter is one of the most basic skills in electronics. It is a good assistant to test and troubleshoot faults that exist in electronic device. This Digital LCD Multimeter Voltmeter Ohmmeter Ammeter will meet your demands. Adopting durable material, it is tough enough to be used for a long time. Besides, it can be used in measuring remaining capacity of the rechargeable battery, so as to check whether the battery is fully-charged. With favorable price, this multimeter will be your best selection. Don't hesitate to bring it home now!
INTRODUCTION
1. DISPLAY: 3½ digit LCD.
2. SWITCH
2.1 FUNCTION and RANGE
Our CMM adopt rotational switch which situated at the middle of the front case. It is used for the selection of FUNCTION and RANGE .
2.2 POWER ON-OFF
In order to save energy, please turn the switch to "OFF" position when not in use.
2.3 HOLD
The switch is used to hold the display reading when the instrument is disconnected from whatever was being measured.
2.4 BACK LIGHT
2.4.1 When BACK LIGHT is turned on. It needs to be turned off by user manually. (This function was revised according to our lovely customers' suggestion, it is more cofortable and practical in fact. Thank you all.)
2.4.2 The BACK-LIGHT will be light when turn on the BLCTR switch. It needs to be turned off and turned on again to continue the switch.
3. "COM" jack : Common jack.
4. " VΩmA" jack
Voltage, resistance, not more 200mA current, temperature and battery input test jack.
5. "10ADC"jack
For the input of more than 200mA current.
Features:
1.New and high quality
2.CMOS integrated circuit and dual slope A/D conversion, auto zero and select polarity
3.70 x 40mm big lcd screen, word size up to 25mm.
4.The best display visual angle is approx 70°
5.It will auto turn off after starting up 25 minutes
6.High reliable measure range and 32 gears are more effective to avoid false operation
7.Support transistor add Diode test
Specifications:
1. DC Voltage: 200mV-600V ±(0.5%±2dgts)
2. AC Voltage: 200/600V ±(1.2%±10dgts)
3. DC Current: 200uA-10A ±(1.0%+2dgts)
4. Resistance: 200Ω-2MΩ ±(0.8%±3dgts)
5. Power supply: 9V,6F22(Without battery)
6. Max. display: 1999
7. Diode: Yes
8: Dynatron: Yes
9. LCD Backlight: Yes
10: Continuity Buzzer: Yes
11: Input Impedance for DCV: 1MΩ
12: Sample Rate: 3times/S
13: Low Battery Indication: Yes
14: Data Hold: Yes
15: LCD Size: 70 x 40mm
16: Dimensions: 5.43”×2.76”×1.22”
17: Standard Accessories: Temperature Probe
18: Standard Individual Packing: Gift Box, English Manual
19: Product Net Weight: 9 oz
TECHNNICAL SPECIFICATION
Accuracy: ±a% of reading: ± N0 digits guaranteed for l year.
Environmental temperature : 23°±2°.
Relative Humidity: <75%.
Package included:
1 x Digital LCD Multimeter Voltmeter Ohmmeter Ammeter
2 x Test Leads
1 x English Manual
Notes:
1.Pls do not change the inner circuit to aviod damaging the ammeter
2.Do not connect it to the voltage over 1000VDC or 750VAC
3.Make sure not connect the error measure range
4.Pls do not use the ammeter if the back cover is wrong
5.Pls remove the pen and cut off the power before replacing battery and fuze