RGB LED Ring 1 3 4 7 8 9 12 16 24 32 Bits LEDs WS2812 5050 RGB LED Ring Lamp Light with Integrated Drivers For Arduino DIY Kit
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Share this Product
1 Bit Features:
WS2812B RGB LED Breakout Full Color Driver Lantern Intelligent Control Module
Size: diameter 12.5mm
main feature
● Intelligent reverse connection protection, reverse power connection will not damage the IC.
● The IC control circuit shares a power supply with the LED point source.
● The control circuit and RGB chip are integrated in a 5050 package component to form a complete external control pixel.
● Built-in signal shaping circuit, after any pixel receives the signal, it is waveform-shaped and then output to ensure that the line waveform distortion will not be accumulated.
● Built-in power-on reset and power-down reset circuit.
● The three primary colors of each pixel can realize 256 levels of brightness display, complete the true color display of 16777216 colors, and the scanning frequency is not less than 400Hz/s.
● Serial cascade interface, which can receive and decode data through one signal line.
● There is no need to add any circuit when the transmission distance of any two points is less than 5 meters.
● When the refresh rate is 30 frames/second, the number of cascades is not less than 1024 points.
● Data transmission speed can reach 800Kbps.
● The color of the light is highly consistent and cost-effective.
Main application areas
● LED full color luminous word string, LED full color module, LED full color soft light strip hard light bar, LED guardrail tube.
● LED point light source, LED pixel screen, LED shaped screen, various electronic products, electrical equipment marquee.
3 Bit Features:
Size: Diameter 17mm
3 Bit Features:
7 Bit Features:
Radius 11.5mm
main feature
● Intelligent reverse connection protection, reverse power connection will not damage the IC.
● The IC control circuit shares a power supply with the LED point source.
● The control circuit and RGB chip are integrated in a 5050 package component to form a complete external control pixel.
● Built-in signal shaping circuit, after receiving a signal, any pixel will be waveform-shaped and then output to ensure that the line waveform distortion will not be accumulated.
● Built-in power-on reset and power-down reset circuit.
● The three primary colors of each pixel can realize 256-level brightness display, complete the true color display of 16777216 colors, and the scanning frequency is not less than 400Hz/s.
● Serial cascade interface, which can receive and decode data through one signal line.
● There is no need to add any circuit when the transmission distance of any two points is less than 5 meters.
● When the refresh rate is 30 frames/second, the number of cascades is not less than 1024 points.
● Data transmission speed can reach 800Kbps.
● The color of the light is highly consistent and cost-effective.
Main application areas
● LED full color luminous word string, LED full color module, LED full color soft light strip hard light bar, LED guardrail tube.
● LED point light source, LED pixel screen, LED shaped screen, various electronic products, electrical equipment marquee.
7 Bit Features:
8 Bit Features:
Inner Diameter: 17.5mm (radius)
Chip: WS2812 (built-in LED)
LED:8pcs 5050 RGB full color highlighting
Voltage: 5V
Ports: Digital
9 Bit Features:
Name: WS2812 full color disc LED module 9 digits (8+1)
Overall size: 3cm in diameter
Chip: WS2812B (built in LED)
LED: 5050 package RGB full color highlight
Voltage: 5V
Port: number
Control mode: built-in control chip, only one IO port can be controlled
12 Bit Features:
Chip: WS2812 (built-in LED)
LED:12pcs 5050 RGB full color highlighting
Voltage: 5V
Ports: Digital
16 Bit Features:
Inner Diameter: 54mm (radius)
Chip: WS2812 (built-in LED)
LED:16pcs 5050 RGB full color highlighting
Voltage: 5V
Ports: Digital
24 Bit Features:
Inner Diameter: 72mm (radius)
Chip: WS2812 (built-in LED)
LED:24pcs 5050 RGB full color highlighting
Voltage: 5V
Ports: Digital
Overall size: diameter 11cm
Chip: WS2812B (built in LED)
LED: 5050 package RGB full color highlight
Voltage: 5V
Port: number
Control mode: built-in control chip, only one IO port can be controlled
Wiring:
5V: positive power supply
GND: negative power supply
DI: signal input
DO: signal output