TZT 5v 1 2 4 6 8 channel relay module with optocoupler. Relay Output 1 /2 /4 /6 / 8 way relay module 12V for arduino blue
Regular price
Rs.455.58
Shipping calculated at checkout.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Share this Product
Product description:
1 channel relay module
- Maximum load: AC 250V/10A, DC 30V/10A
- Trigger current: 5mA
- Working voltage: 5V
- Module size: 50 x 26 x 18.5mm (L x W x H)
- Four mounting bolts holes, diameter 3.1mm
- DC+: positive power supply (VCC)
- DC-: negative power supply (GND)
- IN: can be high or low level control relay
- NO: normally open relay interface
- COM: Common Interface Relays
- NC: normally closed relay interface
-
-
-
-
-
-
-
-
-
- 2 channel relay module
-
1 Dimensions: 50.5mm (length) * 38.5mm (W) * 18.5 (H)2 Weight:. 31g3.PCB Color: Black4 board four weeks with four screws holes, hole diameter 3.1mm, easy to install and fixed5 relay of high quality loose music relays SPDT. A common terminal, a normally open, one normally closed terminal6 optocoupler isolation, good anti-jamming7 low pull, high release. Energisation status indicator light, release status LED is off8.VCC of system power, JD_VCC relay power. You can plug in jumpersElectrical parameters:Supply voltage: 5VDC, 12VDCCurrent: more than 100mALoad: 250V 10A AC or 30V 10A DCWiring:VCC: positive power supply systemGND: System power negativeIN1 - IN2: relay control ports
-
-
-
-
-
-
-
-
-
-
-
-
4-channel relay output modules, relay output contacts 250A 10A. Input IN1, IN2, IN3, IN4, the signal line LOW effective. VCC, GND power input, can relay a separate power supply relay power input of JD-VCC.
Uses:
1, support all MCU control.
2, the industrial sector;
3, PLC control;
4, smart home control -
-
-
-
-
-
-
-
-
-
-
6 channel relay module
5V 6 channel relay module Arduino PIC ARM DSP AVR Raspberry Pi -
Contact capacity of 250V 10A relay.Relay output normally open, normally closed;
-
Activity.5 V input voltage range signal relay: 0-5 V;
-
VCC system power supply.Power supply relay jd-vcc.Standard 5 V relay.
-
Size: 10.4 * 5.2cm / 4.09 "* 2.05"
-
Quantity: 1 PC
-
Note:
-
1. Due to different displays and lighting effects, the actual color of the project may be slightly different from the color shown on the picture.Thank you very much!
-
-
2. Due to manual measurement, please allow a measurement deviation of 0.5-1cm.1 cm = 0.3937"
-
-
-
-
-
-
-
-
-
-
-
8 channel relay module -
Features
Using high-current relay , AC250V 10A DC30V 10AContact some independent wiring , safe and reliableStandard interface , can be extended in a variety of development boardWith fixed screw holes for easy installationSuitable for a variety of platforms such as 51/AVR/AVR/ARMModule Description :1 , the module complies with international safety standards , the load control area and regional isolation tank ;2, using double-sided FR-4 circuit board design, high-end chip production process ;3, using loose music authentic relay control ;4, with the relay instructions , pull off, disconnect does not shine ;5, the signal input has a low signal , often beginning with a common terminal will be turned on ;6 , the relay can control the various devices and the load ;7 , 8 and 8 normally open normally closed contact ;8 , blue KF301 terminals to the control line is more convenient.9 , Module size : 138m * 56mm * 18.5mm ( L * W * H ) , Weight : 120g10 with 4 fixing bolt holes , hole 3.1mm, pitch 131mm * 49.5mm11 , finished by 100% functional testing and stability testingTwo module interface :1, VCC: 5V power supply connected to the positive2, GND: 5V power supply connected to the negative3, IN1-IN8: trigger signal , active lowRelay outputs : a 12- line interface, the interface can be directly connected to all leads , user-friendly1, NO1 - NO8: normally open relay interfaces , relay before the vacant after the pull shorted with COM2, COM1 - COM8 Relay Common Interface3, NC1 - NC8: normally closed relay interface relay shorted with COM ago , after the pull- vacant