Wireless Remote Control Switch AC 220V Receiver Wall Panel Remote Transmitter Hall Bedroom Ceiling Lights Wall Lamps Wireless TX

This mini AC22OV Receiver board is an excellent product. Its size is mini. Seldom AC Receiver board can be such small. Although it is small, however its performance is perfect than bigger common capacitors Receiver board. It uses film cap is much safer than common capacitors. Film cap is unlike common capacitors, after the external power supply is disconnected the charge  power will remain for a long time , if you touch it will get an electric shock, film cap will not has this kind problem. Although the film cap become invalid .it will not lead to electric shock, and will not endanger the personal safety.

1. Working Voltage: AC220V    (Input AC220V Output AC220V)

2.Max Current: 10A Relay have better load less than 3A (3.15A Fuse) AC220V 600W
3.Channel: 1CH
4.Working Frequency : 315MHZ/433.92MHZ Optional by leaving us massage
Receiver sensitivity: : -105Db
Working temperature : -10'C - +60'C
Output way : Momentary. Toggle .Latched Adjusted by soldering

Code type: Learning code Add Controller by the Learning Button on the receiver

Output State:
Momentary, Toggle, Latched adjusted freely by soldering with different dot .

A: Momentary-----------No connection is Momentary.

B: Toggle------------Connect “T& Mid Dot “is Toggle.

C: Latched------------- Connect “L& Mid Dot” is Latched.

Momentary------------Press the Transmitter button , the receiver relay is ON, release button; the receiver relay is OFF,

Toggle---------------Press transmitter button for 1 time , the receiver relay is ON, press button again, the receiver relay is OFF,

Latched------------Press transmitter button A, the receiver relay is ON, Press the transmitter button B, the relay is OFF.

Clearing Code

Input AC220V for the Receiver ,Keeping press the Learning Button on the receiver until the LED indicator ON and then flash ,until it flash  for 8 times. it mean the code have been cleared successfully.

Learning Method

Momentary/Toggle----

Input AC220V for the Receiver .Keeping press the learning button, the LED indicator ON and flash slow .then press the transmitter button,  the LED indicator flash fast ,it mean learning successfully.

Latched ------

Input AC220V for the Receiver .Press the Learning Button on the receiver, the LED indicator ON and flash slow .then press the transmitter 1th button,  the LED indicator flash fast and flash slow again .Press the 2th Button right now, then the LED indicator flash fast and OFF , it means Latched mode learning is finished 

( ON OFF Button Learning is independent,you can set the ON OFF Button as your needy)